Best Airless Paint Sprayer Gun Filters 2026: Three Replacement Options
Compare airless paint sprayer gun filters by mesh, gun fit and pack contents, from a Graco original to fine filters and a mixed maintenance kit in 2026.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
Prices and availability are accurate as of the time of publication and are subject to change.
The Graco 288749 is our best overall airless paint sprayer gun filter for an SG2 or SG3 owner who needs a straightforward replacement for latex coatings. Its 60-mesh screen and original part number make it an easy starting point, provided your coating and gun manual call for that mesh.
Airless paint sprayer gun filters compared
We compared the stated mesh sizes, compatibility and pack contents, rather than assuming that every filter with a similar shape will fit. The original Graco part is sold singly. The six-pack provides only fine 100-mesh gun filters; the mixed kit adds coarser gun filters and separate pump inlet strainers. All three require cleaning and eventual replacement, not just installation.
| Product | Best for | Price |
|---|---|---|
| Graco 288749 60-Mesh Gun Filter | Original replacement for latex | View |
| LUCKXUANYUAN 100-Mesh Gun Filters, 6-Pack | Fine-filter spares | View |
| LUCKXUANYUAN Mixed Filter Kit | Gun and inlet maintenance | View |
Graco 288749: the original for common coatings
Graco 288749 60-Mesh Gun Filter
The Graco 288749 is a single 60-mesh gun filter intended for SG2 and SG3 guns, with SG10, SG20 and SG Pro also listed as compatible. Graco identifies this mesh for latex and latex enamels, so it is the most direct choice here for an owner replacing the original filter after ordinary painting work. It earns best overall because the manufacturer part number and gun-family fit are explicit, without requiring a bulk purchase or a collection of extra parts. The tradeoff is that one filter provides no spare, and 60 mesh is not automatically the right screen for a thin finish or a different gun. Follow the coating and sprayer instructions, clean after use and replace the filter when it is damaged or too clogged to clean.
Pros
- Original Graco part 288749 identifies the replacement for SG2 and SG3 guns
- 60-mesh screen is listed for latex and latex-enamel coatings
Cons
- Single filter leaves no spare for an interruption during a job
- The 60-mesh screen is not the fine 100-mesh option for thin finishes
LUCKXUANYUAN 100 mesh: fine screens in reserve
LUCKXUANYUAN 100-Mesh Gun Filters, 6-Pack
This aftermarket six-pack contains orange 100-mesh filters sold as replacements for the Graco 288750 style. The seller lists SG2, SG3, SG10, SG20 and SG Pro guns and describes the fine mesh for lacquer and solvent-based paint. It is the most useful choice here for someone who repeatedly sprays compatible thin coatings and wants several identical screens ready between jobs. Six pieces do not mean six different grades: there is no coarser 60-mesh filter or inlet strainer in this pack. It earns the fine-coating badge on its mesh and quantity, not a claim that it fits every airless gun. Check the gun's part reference and the finish manufacturer's instructions before choosing it, then clean each filter after use rather than treating a supply of spares as a substitute for maintenance.
Pros
- Six matching 100-mesh screens provide several fine-filter replacements
- The listed 288750 style covers SG2 and SG3 as well as SG10 and SG20 guns
Cons
- No 60-mesh screen is included for work requiring a coarser filter
- Aftermarket fit should be checked against the exact gun's replacement part
LUCKXUANYUAN mixed kit: spares for two stages
LUCKXUANYUAN Mixed Filter Kit
The mixed aftermarket kit contains four 60-mesh 288749-style gun filters, two 100-mesh 288750-style gun filters and two 35-mesh 288716-style inlet strainers. The seller specifies SG2, SG3, SG Pro, SG10 and SG20 for the gun filters, while the inlet strainers have a three-quarter-inch male thread and a separate list of compatible Magnum models. This is the best maintenance kit because a compatible owner can keep two gun mesh sizes and inlet replacements together, instead of buying each type separately. Its limitation is the same variety: parts left unused offer no benefit if the pump or gun is not on the relevant fit list. The inlet screen is not interchangeable with the gun filter. Check both model numbers and select the gun mesh for the coating rather than installing every piece at once.
Pros
- Four 60-mesh and two 100-mesh gun filters cover two filtration grades
- Two 35-mesh inlet strainers add pump-side replacements for listed Magnum models
Cons
- The three-quarter-inch inlet thread requires a compatible pump, not just a compatible gun
- A mixed kit leaves unused parts if only one filter grade is needed
How to choose the right replacement
Start with the model printed on the spray gun, not just the pump's model. A gun can be replaced independently of the sprayer, so a pump match alone does not establish the filter's fit. The Graco 288749 is the clearest original choice for the named guns; the other two are third-party replacements. The mixed kit's inlet strainer has its own pump compatibility list, separate from that of its gun filters.
Next, match mesh to the coating and tip instructions. The manufacturer describes 60 mesh for latex coatings and 100 mesh for thinner materials such as stain and lacquer. A finer screen catches smaller debris but can restrict a material for which it is not recommended. It is not a universal upgrade, and it cannot make an unsuitable tip or coating combination work.
Before opening the gun or removing an inlet screen, follow the sprayer's pressure-relief procedure and disconnect its power as directed in its manual. Clean parts using a method and solvent appropriate to the coating and equipment. Inspect the screen for tears or persistent blockage before reuse. Keep the protective tip guard in place during operation and seek urgent medical care for any suspected high-pressure injection injury.
Frequently asked questions
Can I use a 100-mesh filter for every paint?
No. Fine mesh can be suitable for thin coatings, but the paint and spray-tip instructions determine the correct combination. A coating that is too heavy for the screen can restrict flow. Consult the gun manual and the coating manufacturer's guidance rather than choosing a finer filter solely because its mesh number is higher.
Does the mixed kit fit every Graco sprayer?
No. The gun filters and inlet strainers have different fit requirements. The seller lists several SG-series guns for the gun filters and specific Magnum pump models for the threaded inlet strainers. Identify both parts on your own equipment before ordering; a match at one end does not guarantee a match at the other.
Should I replace a filter after each job?
Not automatically. Clean the filter after use according to the equipment and coating instructions, then inspect it for damage and stubborn deposits. Graco advises replacing its filter when it is more than 20% clogged. Keep a spare if uninterrupted work matters, but never service a pressurized gun.
Prices and availability are accurate as of publication and may change.